STA-01-7-OEM micro laser is OEM version of our popular STA-01-7 laser model. Micro laser consists of miniature laser head measuring only 52 mm in length and 25 mm in diameter and a very compact laser controller that requires 12V to operate. Excellent laser beam parameters, rugged design accompanied by overall system compactness make this laser a convenient tool for demanding applications.
|Average Output Power (max), mW||100|
|Pulse Energy, µJ||100|
|Pulse Width (FWHM), ns||0.6|
|Repetition Rate (max), kHz||1|
|Beam Profile||M2 ≤ 1.1|
|Pulse Spectral Structure||Single longitudinal mode|
|Polarization Ratio||> 100 : 1|
|Beam Waist Diameter Inside the Laser Head 1/e2, µm||25 – 400|
|Pulse Spectrum FWHM, pm||< 5 (near transform limited)|
|Pulse to Pulse Energy Stability RMS||< 0.4|
|Power Stability Over Six Hours||< ±1.5|
|External Power Supply Voltage, V AC||100 – 240|
|Operating Temperature, °C||22±1 1 , non-condensing|
External Trigger (TTL rising edge):
from single shot up to 1kHz
|Laser Head Dimensions:|
|Laser Controller Box Dimensions (LxWxH), mm||179 x 150 x 51|
|Warranty||12 months or 5000 hours whichever occurs first|
|Laser Head Cooling||Radiator: 12LGL2-25 included|
|Laser Controller Cooling||Included|
* Each Standa STA-01 laser is equipped with proper heatsink by default.
1 – Is specified an ambient temperature at which the laser parameters exactly meet the specifications in the table.
Specifications are subject to changes without advance notice.