LEDMOD V2 Series

LEDMOD V2 Series

TEC-cooled High Power LED modules from 255 nm to 950 nm with optional fibre-coupling

High Power LED modules with TEC cooling and optional fibre-coupling

The LEDMOD V2 modules offer great functionality and flexibility for applications in industry and research. With more than 40 different wavelengths from deep UV to the near infrared and optical output power of several hundred milliwatts, the so-called “LEDMOD” series can be used in many applications such as microscopy, chemical analysis, spectroscopy, forensics and other areas. The LED modules are available in a fibre-coupled version or with free emission. The modules have modulation inputs for fast analogue intensity modulation with up to 200 kilohertz and digital modulation with a switching time of < 2µs. High-precision temperature stabilization of the LED chips ensures a very good performance and wavelength stability. This is important especially for applications that not only need an exact output power, but also a high stability of the emission spectrum. The digital modulation can be operated via external modulation signals, as well as an internal, programmable signal generator. A SYNC output ensures synchronization with external devices such as cameras, spectrometers and lock-in amplifiers. One or several optional “LEDMOD” modules can be comfortably controlled via RS-232 and USB 2.0 interface by either the supplied software ‘Omicron Control Center’ or the customer’s own software.

– Software driver for Metamorph available

LEDMOD Series – Specifications
LEDMOD V2
Wavelengths & Powers(other wavelengths and powers on request)Deep-UV:
255nm / 150µW *
265nm / 400µW *
275nm / 6mW *
280nm / 600µW *
310nm / 50mW
340nm / 50mW
UV / Violett:
365nm / 450mW
385nm / 450mW
405nm / 450mW
VIS:
455nm / 450mW
470nm / 450mW
505nm / 100mW
528nm / 100mW
590nm / 100mW
617nm / 450mW
625nm / 450mW
IR:
850nm / 800mW
950nm / 800mW
White:
5600K / 400mW
Free emission angle120 – 130° (Deep-UV 10°)
Temperature controlactive peltier cooling (TEC)
External modulation capabilitiesup to 500kHz analogue modulation
up to 500kHz digital modulation
Modulation inputs1x Analoge modulation (0…5V / 2.5kOhm) via SMA Connector
1x Digital modulation (TTL / 5kOhm) via SMA Connector
Internal modulation capabilitiesUp to 200kHz with programmable frequency and duty-cycle
Power setting resolutioninternal: 12Bit
external: analogue
 SYNC outputTTL signal via SMA connector
Computer interfaceUSB-2.0 and RS-232
Operation modes1.) external analogue control (0…5V) for output power and additional external TTL signal for ON/OFF modulation
2.) internal power control with external TTL for ON/OFF modulation
3.) internal power control CW (continues wave) operation(no external signals necessary)
4.) internal power control + programmable frequency and duty-cycle for ON/OFF modulation (no external signals necessary)
5.) external power control (0…5V) for output power + programmable frequency and duty-cycle for ON/OFF modulation
Control interface15-pin HD-Sub-D connector
Dimensions (without fibre-coupling unit) 56x52x166mm (HxWxL).
Weight350g
Supply voltage11VDC-25VDC
Power consumption27W max. <1W in standby
Environmental temperature0°C-45°C
CertificationsCE, UL/CSA on request
Special features* Interlock function
* Over-TEMP protection
* Remote-control
* SYNC output
Options* High-efficiency fibre coupling into high-NA POF and fused-silica fibres (e.g. 2mm / 70%, 1mm / 35%)
* Collimating and focussing objectives
* Beam shaping (diffractive and refractive)

* Deep-UV models are not available with fiber coupling option.

Reviews

There are no reviews yet.

Be the first to review “LEDMOD V2 Series”

Your email address will not be published. Required fields are marked *

Go to Top