BeamOn 2/3-Laser Beam Analysis

A complete system for Laser Beam Analysis, composed of a 2/3″ CCD camera head, a set of 3 colored filters (ND8,2xN16) in housing, a USB 2.0 attachment, software on CD disk, carrying case.

The BeamOn 2/3″ CCD system is a beam diagnostics measurement system for real-time measurement of continuous or pulsed laser beams. Its 2/3″ CCD sensor allows it to cover a larger beam size with an active area of 8.5mmX6.35mm, and pixel size of 11.6µmx11.2µm.
It measures laser beam parameters, such as: beam width, shape, position, power, and intensity profiles.

The BeamOn 2/3 is USB software driven device, which can be connected to a Notebook (or Desktop) computer via the High Speed USB 2.0 port run on Windows XP/2000/7/8/10 (32 & 64 bit) platforms.

Specifications

Parameters	Value
Camera type	Monochrome interline transfer CCD 2/3″format
Spectral range	350~1100nm
Sensor active area	8.5mm×6.35mm
Pixel size	11.6um×11.2um
S/N Ratio	58dB
Sensitivity	~40 nW/cm2 at 633nm
Saturation intensity	50W/cm2 or 1J/cm2 with all filters installed
Handing of pulse	Abillty to capture and replay image from slowly pulsing laser(1~100Hz)while filtering out frames with no laser pulse.Gain control and external filter make it easy to abtain optimal intensity
Trigger	In pulsed mode,sliding bae control allows setting of threshold so as to display only frames with captured pulse.
Shutter speed	1/50s(“Off”) to 1/100000 sec,8 steps manually,or automatic
Frame rate	25Hz
Dimensions	60mm(L)×45mm(W)×40mm(H)
Weight	120 gr.without cable(320 gr. With cable)
Operating temperature	10℃ to 50℃
Operating systems	Windows XP/2000/7 32&64 bit
PC interface	USB 2.0 attachment

Ordering Information

BeamOn2/3 The system comes with a camera, a post, a set of 3xND colored filters (ND8, 2xN16) in housing, a USB2.0 attachment, software on CD disk, carrying case.

Additional accessories

SAM1: Beam sampler (ratio 3X10^(-3))

SAM2: Beam sampler (ratio 1X10^(-6))