Beam Analyzer High Power

High precision beam diagnostics for CW lasers up to 4 kWatts. A wide spectral range from deep UV through 2700 nm.

Wide dynamic range, beam size measurements down to several microns and up to 9 mm.

This is a complete system for high laser power measurement, including a beam sampler, the measuring head and proprietary cooling based on standard pressurized filtered air (1 micron or less) of 3-5 bars.

Specifications

Laser type	CW
Beam size range	Ø15um~Ø9mm
Spectral region	350~1100nm
Power range @900/1070 nm	1W~5KW
Maximum power density	100000 W/cm2
Sensor focal position	Optical distance from input surface to sensor’s active surface is 44.7mm ± 0.2mm
Output power from back side of beam	90% of input power

Head Machanical specifications

Dimensions	137×105×40mm
Number of blades	7（Based on BA7 head）
Cooling conditions	Pressurized air of 6~8Bar
Environment operating temperature	0~35℃
Weight	Sensor head 800 gr with cable,manifold box 350 gr

Sensor specifications

sensor type	Silicone(Si)
Beam width resolution	1um
Beam width accuracy	±2%
Power accuracy	±7.5%
Power resolution	50um
Position accuracy	±15um
Position resolution	1um
Measurement rate	5Hz
PC interface	USB2.0

Ordering Information

Complete system including a measuring head with 2.5m long attached cable, a mounting post, a USB2.0 manifold box, software and user manual on CD, carrying case.

BA7-Si-USB-SAM3-HP-B: 7-blades, Si detector 9mm square with high power attenuator and mounting adapter.